Material Hardness Chart
Compare Brinell, Rockwell, and Vickers hardness values for 25+ metals and plastics. Use this chart to pick the right material for your CNC parts.
Hardness Values of Common Materials and Alloys
| Material | Alloy / Grade | Brinell (HB) | Rockwell B (HRB) | Rockwell C (HRC) | Vickers (HV) | Mohs | Typical Use |
| Aluminum | 6061-T6 | 95 | 60 | — | 107 | 2.75 | Structural frames, brackets, fixtures |
| Aluminum | 7075-T6 | 150 | 87 | — | 175 | 2.75 | Aerospace fittings, high-stress parts |
| Aluminum | 2024-T3 | 120 | 75 | — | 137 | 2.75 | Aircraft skins, fuselage structures |
| Stainless Steel | 303 | 187 | 96 | — | 210 | 5.5 | Screw machine parts, shafts, valves |
| Stainless Steel | 304 | 201 | 92 | — | 210 | 5.5 | Food equipment, chemical tanks |
| Stainless Steel | 316 | 217 | 95 | — | 220 | 5.5 | Marine hardware, medical implants |
| Stainless Steel | 17-4 PH (H900) | 388 | — | 40 | 410 | 5.5 | Aerospace valves, turbine blades |
| Alloy Steel | 4140 (annealed) | 197 | 93 | — | 207 | 5 | Gears, shafts, axles |
| Alloy Steel | 4140 (hardened) | 321 | — | 34 | 340 | 5 | High-strength shafts, couplings |
| Alloy Steel | 4340 (annealed) | 217 | 96 | — | 228 | 5 | Landing gear, crankshafts |
| Carbon Steel | 1018 | 126 | 71 | — | 131 | 4.5 | Pins, spacers, low-stress parts |
| Carbon Steel | 1045 (annealed) | 163 | 84 | — | 170 | 4.5 | Bolts, studs, hydraulic shafts |
| Tool Steel | A2 | — | — | 57–62 | 630–750 | 7 | Punches, blanking dies, gauges |
| Tool Steel | D2 | — | — | 58–64 | 650–800 | 7.5 | Slitting cutters, stamping dies |
| Tool Steel | O1 | — | — | 57–62 | 630–750 | 7 | Taps, reamers, jigs, fixtures |
| Tool Steel | S7 | — | — | 54–58 | 580–650 | 6.5 | Chisels, impact tools, mold cores |
| Titanium | Ti-6Al-4V (Grade 5) | 334 | — | 36 | 349 | 6 | Aerospace fasteners, implants |
| Titanium | Grade 2 (CP) | 200 | 80 | — | 210 | 6 | Chemical processing, marine parts |
| Titanium | Grade 5 (ELI) | 326 | — | 35 | 341 | 6 | Surgical implants, biomedical |
| Brass | C360 (Free-Cutting) | 124 | 78 | — | 130 | 3.5 | Fittings, connectors, valves |
| Copper | C110 (ETP) | 50 | — | — | 55 | 3 | Bus bars, electrical contacts |
| Acetal (POM) | Delrin 150 | — | — | — | — | 2.5 | Gears, bearings, bushings |
| PEEK | Unfilled | — | — | — | — | 3 | Seals, insulators, implants |
| Nylon | 6/6 | — | — | — | — | 2 | Wear pads, cable ties, rollers |
| Nickel Alloy | Inconel 718 | 331 | — | 36 | 350 | 6 | Turbine discs, exhaust parts |
| Nickel Alloy | Hastelloy C-276 | 210 | 96 | — | 220 | 5.5 | Chemical reactors, heat exchangers |
Quick Answer: What Is a Material Hardness Chart?
A material hardness chart lists how well each metal or plastic resists denting, scratching and wear, measured on standard test scales. Hardness is found by pressing an indenter into the surface and measuring the mark. Machinists use the chart to pick a material, predict tool wear and set cutting speeds for CNC parts.
This chart compares five hardness scales across 25+ materials: Brinell (HB), Rockwell B (HRB), Rockwell C (HRC), Vickers (HV) and Mohs. Search by material, alloy or use, filter by metal family and sort any column. Soft metals read on HB or HRB, hardened steels read on HRC and thin or very hard parts read on HV.
Typical hardness values: 6061-T6 aluminum 95 HB | 304 stainless 201 HB | Ti-6Al-4V 36 HRC | 4140 hardened 34 HRC | A2 tool steel 57–62 HRC | D2 tool steel 58–64 HRC. Most CNC-friendly metals fall between 80 HRB and 35 HRC; above 45 HRC you may need carbide or ceramic tooling.
Need hardened parts machined?
Upload your CAD file for an instant quote. Free DFM review included with every order.
Latest News
Robot Joint Modules: Components, Manufacturing…
Robot Joint Modules: Components, Manufacturing Processes, and Precision Requirements At the 2026 APEC Economic Leaders’ Meeting in Shenzhen, humanoid robots…
Precision Machining of New Energy…
Precision Machining of New Energy Vehicle Motor Shafts: Processes and Case Studies The drive motor is a key component of…
CNC Machining Process Optimization for…
CNC Machining Process Optimization for an Aerospace Precision Cylinder Aerospace precision cylinder components often feature complex geometries, tight dimensional tolerances,…