Material Properties Chart
Compare strength, density, thermal conductivity, and melting point for 20+ metals and plastics. Use this chart to pick the best material for your CNC parts.
Common Material Properties
| Material | Grade | Density (lb/in³) | Tensile Strength (ksi) | Yield Strength (ksi) | Elongation (%) | Thermal Conductivity (BTU/hr-ft-°F) | Melting Point (°F) |
| Aluminum | 6061-T6 | 0.098 | 45 | 40 | 12 | 96 | 1,080 |
| Aluminum | 7075-T6 | 0.101 | 83 | 73 | 11 | 75 | 1,175 |
| Aluminum | 2024-T3 | 0.100 | 70 | 50 | 18 | 70 | 1,180 |
| Stainless Steel | 304 | 0.289 | 75 | 30 | 40 | 9.4 | 2,550 |
| Stainless Steel | 316 | 0.289 | 75 | 30 | 40 | 9.0 | 2,500 |
| Stainless Steel | 17-4 PH (H900) | 0.282 | 190 | 170 | 10 | 10.6 | 2,560 |
| Alloy Steel | 4140 (annealed) | 0.284 | 95 | 60 | 26 | 25 | 2,750 |
| Alloy Steel | 4340 (annealed) | 0.283 | 108 | 68 | 22 | 24 | 2,670 |
| Carbon Steel | 1018 | 0.284 | 64 | 54 | 15 | 30 | 2,760 |
| Carbon Steel | 1045 (annealed) | 0.284 | 82 | 45 | 16 | 29 | 2,770 |
| Tool Steel | A2 | 0.283 | 230 | 155 | 8 | 15 | 2,600 |
| Tool Steel | D2 | 0.278 | 255 | 215 | 3 | 14 | 2,580 |
| Titanium | Ti-6Al-4V (Grade 5) | 0.160 | 130 | 120 | 14 | 4.0 | 3,040 |
| Titanium | Grade 2 (CP) | 0.163 | 50 | 40 | 20 | 9.5 | 3,040 |
| Brass | C360 (Free-Cutting) | 0.307 | 58 | 25 | 25 | 67 | 1,650 |
| Copper | C110 (ETP) | 0.323 | 32 | 10 | 45 | 226 | 1,980 |
| Acetal (POM) | Delrin 150 | 0.052 | 10 | 8 | 40 | 0.13 | 347 |
| PEEK | Unfilled | 0.047 | 14 | 13 | 50 | 0.15 | 644 |
| Nylon | 6/6 | 0.041 | 12 | 6 | 60 | 0.14 | 500 |
| Nickel Alloy | Inconel 718 | 0.296 | 185 | 150 | 12 | 6.4 | 2,300 |
| Aluminum | 5052-H32 | 0.097 | 33 | 28 | 12 | 80 | 1,125 |
| Stainless Steel | 303 | 0.289 | 85 | 35 | 40 | 9.3 | 2,550 |
Quick Answer: What Are Material Properties?
Material properties are the measured traits that tell you how a metal or plastic behaves under load, heat and stress. They are the numbers engineers use to pick the right material for a CNC part. The core mechanical and thermal properties are density, tensile strength, yield strength, elongation, thermal conductivity and melting point.
This chart lists typical published values for 22 common CNC materials so you can compare: density (lb/in³), ultimate tensile strength (ksi), yield strength (ksi), elongation (%), thermal conductivity (BTU/hr·ft·°F) and melting point (°F). Filter by Aluminum, Steel, Stainless Steel, Titanium, Copper/Brass or Plastics, or search by grade.
Common machining picks: Aluminum 6061-T6: 45 ksi tensile, 0.098 lb/in³ | Stainless 304: 75 ksi tensile, 9.4 thermal | Titanium Ti-6Al-4V: 130 ksi tensile, 0.160 lb/in³ | Delrin (Acetal): 10 ksi tensile, 0.052 lb/in³.
Notes on This Chart
- All values are typical. They may vary by supplier, lot, and heat treatment.
- Tensile and yield strength are given in ksi (thousand pounds per square inch).
- Thermal conductivity is in BTU per hour per foot per degree Fahrenheit.
- Plastic melting points are glass transition or melt flow temperatures, not true melting points.
- Always check your material test report (MTR) before production.
Need precision CNC parts?
Upload your CAD file for an instant quote. Free DFM review included with every order.
Latest News
Robot Joint Modules: Components, Manufacturing…
Robot Joint Modules: Components, Manufacturing Processes, and Precision Requirements At the 2026 APEC Economic Leaders’ Meeting in Shenzhen, humanoid robots…
Precision Machining of New Energy…
Precision Machining of New Energy Vehicle Motor Shafts: Processes and Case Studies The drive motor is a key component of…
CNC Machining Process Optimization for…
CNC Machining Process Optimization for an Aerospace Precision Cylinder Aerospace precision cylinder components often feature complex geometries, tight dimensional tolerances,…