Retaining Ring & Snap Ring Size Chart
Reference chart for internal and external retaining ring sizes with groove dimensions, ring thickness, and gap specifications. Covers 3/8″ through 3″ for both external (shaft) and internal (bore) rings per ANSI B27.7.
Retaining Ring & Snap Ring Size Chart
| SHAFT/BORE SIZE | RING THICKNESS | DIAMETER FREE | GROOVE DIAMETER | GROOVE WIDTH | GROOVE DEPTH | MAX RPM |
| 3/8″ shaft | 0.025″ | 0.360″ | 0.348″ | 0.028″ | 0.021″ | 32,000 |
| 7/16″ shaft | 0.025″ | 0.422″ | 0.409″ | 0.028″ | 0.021″ | 28,000 |
| 1/2″ shaft | 0.035″ | 0.484″ | 0.468″ | 0.038″ | 0.023″ | 24,000 |
| 9/16″ shaft | 0.035″ | 0.547″ | 0.530″ | 0.038″ | 0.023″ | 21,000 |
| 5/8″ shaft | 0.042″ | 0.609″ | 0.590″ | 0.046″ | 0.027″ | 19,000 |
| 3/4″ shaft | 0.042″ | 0.734″ | 0.712″ | 0.046″ | 0.027″ | 15,000 |
| 7/8″ shaft | 0.050″ | 0.859″ | 0.833″ | 0.054″ | 0.031″ | 12,000 |
| 1″ shaft | 0.050″ | 0.984″ | 0.955″ | 0.054″ | 0.031″ | 10,000 |
| 1-1/8″ shaft | 0.050″ | 1.109″ | 1.078″ | 0.054″ | 0.031″ | 9,000 |
| 1-1/4″ shaft | 0.062″ | 1.234″ | 1.198″ | 0.068″ | 0.035″ | 8,000 |
| 1-1/2″ shaft | 0.062″ | 1.484″ | 1.443″ | 0.068″ | 0.035″ | 6,500 |
| 1-3/4″ shaft | 0.078″ | 1.734″ | 1.688″ | 0.086″ | 0.042″ | 5,500 |
| 2″ shaft | 0.078″ | 1.984″ | 1.933″ | 0.086″ | 0.042″ | 4,500 |
| 2-1/2″ shaft | 0.093″ | 2.484″ | 2.423″ | 0.102″ | 0.050″ | 3,500 |
| 3″ shaft | 0.109″ | 2.984″ | 2.913″ | 0.120″ | 0.058″ | 2,800 |
| 3/8″ bore | 0.015″ | 0.403″ | 0.400″ | 0.018″ | 0.015″ | — |
| 1/2″ bore | 0.025″ | 0.522″ | 0.528″ | 0.028″ | 0.020″ | — |
| 5/8″ bore | 0.035″ | 0.649″ | 0.656″ | 0.038″ | 0.024″ | — |
| 3/4″ bore | 0.042″ | 0.774″ | 0.782″ | 0.046″ | 0.027″ | — |
| 7/8″ bore | 0.042″ | 0.899″ | 0.908″ | 0.046″ | 0.027″ | — |
| 1″ bore | 0.042″ | 1.024″ | 1.035″ | 0.046″ | 0.027″ | — |
| 1-1/4″ bore | 0.050″ | 1.275″ | 1.290″ | 0.054″ | 0.031″ | — |
| 1-1/2″ bore | 0.062″ | 1.524″ | 1.543″ | 0.068″ | 0.035″ | — |
| 2″ bore | 0.062″ | 2.024″ | 2.050″ | 0.068″ | 0.035″ | — |
| 2-1/2″ bore | 0.078″ | 2.524″ | 2.558″ | 0.086″ | 0.042″ | — |
| 3″ bore | 0.093″ | 3.024″ | 3.065″ | 0.102″ | 0.050″ | — |
Quick Answer: What Is a Retaining Ring?
A retaining ring, also called a snap ring or circlip, is a spring-steel fastener that drops into a machined groove to hold parts on a shaft or inside a bore. An external (shaft) ring expands to snap over a shaft; an internal (bore) ring compresses to seat inside a housing. Both create a fixed shoulder that stops axial movement of bearings, gears and pulleys.
This chart lists 26 standard sizes per ANSI B27.7 from 3/8″ to 3″, for both external and internal rings. Each row gives ring thickness, free diameter, groove diameter, groove width, groove depth and max RPM. Search by shaft or bore size, filter by ring type and sort any column.
Typical sizes: 1″ external ring, 0.050″ thick, 0.955″ groove diameter, 0.054″ groove width, 10,000 max RPM | 1/2″ external, 0.035″ thick, 0.468″ groove diameter | 1″ internal ring, 0.042″ thick, 1.035″ groove diameter. Groove width runs slightly wider than ring thickness for clean installation.
Notes on This Chart
- External ring groove diameters are smaller than shaft diameter (ring snaps into groove).
- Internal ring groove diameters are larger than bore diameter (ring compresses into groove).
- Max RPM applies to external rings only; internal rings in stationary housings have no RPM limit.
- A dash (—) for Max RPM indicates the ring is in a stationary bore.
- All dimensions per ANSI B27.7. Always verify against specific manufacturer specifications.
Need retaining ring grooves machined?
Upload your CAD file for an instant quote. Free DFM review included with every order.
Frequently Asked Questions
What is the difference between an internal and external retaining ring?
An external retaining ring installs in a groove around a shaft to prevent components from moving axially. An internal retaining ring fits into a groove inside a bore or housing. External rings expand over the shaft, while internal rings compress during installation.
How do I determine the correct groove dimensions for a retaining ring?
Use the dimensions specified for the retaining ring size and applicable standard, such as ANSI B27.7 or DIN 471/472. The key dimensions are groove diameter, groove width, and groove depth. Always verify the manufacturer’s specifications to ensure the ring seats correctly.
What materials are retaining rings typically made from?
Most retaining rings are made from carbon spring steel, commonly SAE 1060–1090, with finishes such as phosphate and oil for corrosion protection. Stainless steel options, including 15-7 PH and 302, are available for corrosive environments, while beryllium copper can be used where non-magnetic or non-sparking properties are required.
What is the maximum RPM for a retaining ring?
The maximum RPM depends on the ring size, material, and whether it is installed internally or externally. External rings on rotating shafts experience centrifugal forces that can cause them to unseat at high speeds. Smaller carbon steel rings may support higher speeds, while larger rings generally have lower RPM limits. Always follow the manufacturer’s rating for the specific ring.
Can a retaining ring be reused after removal?
A retaining ring may be reused if it was removed without deformation and retains its original spring force. Replace any ring showing distortion, fatigue, corrosion, or reduced tension. For critical applications, using a new retaining ring during reassembly is recommended.