Metric vs Imperial Thread Comparison Chart
Side-by-side comparison of metric and imperial (unified) thread sizes with equivalent diameters, pitches, and closest matches. Use this chart to find the nearest metric equivalent for any UNC or UNF thread.
Metric vs Imperial Thread Comparison Chart
| THREAD IMPERIAL | TPI | MAJOR DIA (IN) | CLOSEST METRIC | PITCH (MM) | MAJOR DIA (MM) | NOTES |
| #2-56 UNC | 56 | 0.0860 | M2.5 x 0.45 | 0.45 | 2.50 | M2.5 is slightly larger; closest standard metric |
| #4-40 UNC | 40 | 0.1120 | M3 x 0.5 | 0.50 | 3.00 | M3 is slightly larger (0.118″ vs 0.112″) |
| #6-32 UNC | 32 | 0.1380 | M3.5 x 0.6 | 0.60 | 3.50 | Very close match in diameter |
| #8-32 UNC | 32 | 0.1640 | M4 x 0.7 | 0.70 | 4.00 | M4 slightly smaller (0.157″ vs 0.164″) |
| #10-24 UNC | 24 | 0.1900 | M5 x 0.8 | 0.80 | 5.00 | M5 is noticeably larger (0.197″) |
| #12-24 UNC | 24 | 0.2160 | M5.5 x 0.5 | 0.50 | 5.50 | M5.5 is uncommon; M5 or M6 usually substituted |
| 1/4″-20 UNC | 20 | 0.2500 | M6 x 1.0 | 1.00 | 6.00 | Most common comparison pair; M6 is slightly smaller |
| 5/16″-18 UNC | 18 | 0.3125 | M8 x 1.25 | 1.25 | 8.00 | M8 is slightly larger (0.315″) |
| 3/8″-16 UNC | 16 | 0.3750 | M10 x 1.5 | 1.50 | 10.00 | M10 is significantly larger (0.394″) |
| 7/16″-14 UNC | 14 | 0.4375 | M11 x 1.5 | 1.50 | 11.00 | M11 is rare; M10 or M12 typically used |
| 1/2″-13 UNC | 13 | 0.5000 | M12 x 1.75 | 1.75 | 12.00 | Close match; M12 is slightly smaller (0.472″) |
| 9/16″-12 UNC | 12 | 0.5625 | M14 x 2.0 | 2.00 | 14.00 | M14 is slightly smaller (0.551″) |
| 5/8″-11 UNC | 11 | 0.6250 | M16 x 2.0 | 2.00 | 16.00 | M16 is slightly larger (0.630″) |
| 3/4″-10 UNC | 10 | 0.7500 | M20 x 2.5 | 2.50 | 20.00 | M20 is significantly larger (0.787″) |
| 7/8″-9 UNC | 9 | 0.8750 | M22 x 2.5 | 2.50 | 22.00 | M22 is close (0.866″) |
| 1″-8 UNC | 8 | 1.0000 | M24 x 3.0 | 3.00 | 24.00 | M24 slightly smaller (0.945″); M27 is larger |
| 1-1/8″-7 UNC | 7 | 1.1250 | M27 x 3.0 | 3.00 | 27.00 | M27 is slightly larger (1.063″); closest standard |
| 1-1/4″-7 UNC | 7 | 1.2500 | M30 x 3.5 | 3.50 | 30.00 | M30 is slightly smaller (1.181″) |
| #4-48 UNF | 48 | 0.1120 | M3 x 0.35 | 0.35 | 3.00 | Fine metric pitch; close diameter match |
| #6-40 UNF | 40 | 0.1380 | M3.5 x 0.35 | 0.35 | 3.50 | Fine pitch M3.5; very close match |
| #8-36 UNF | 36 | 0.1640 | M4 x 0.5 | 0.50 | 4.00 | M4 fine pitch; close diameter |
| #10-32 UNF | 32 | 0.1900 | M5 x 0.5 | 0.50 | 5.00 | M5 fine; diameter difference ~0.007″ |
| 1/4″-28 UNF | 28 | 0.2500 | M6 x 0.75 | 0.75 | 6.00 | Fine pitch pair; not interchangeable |
| 5/16″-24 UNF | 24 | 0.3125 | M8 x 1.0 | 1.00 | 8.00 | M8 fine; slightly larger diameter |
| 3/8″-24 UNF | 24 | 0.3750 | M10 x 1.0 | 1.00 | 10.00 | M10 fine; significantly larger |
| 7/16″-20 UNF | 20 | 0.4375 | M11 x 1.0 | 1.00 | 11.00 | M11 fine is rare; M12 x 1.25 more common |
| 1/2″-20 UNF | 20 | 0.5000 | M12 x 1.25 | 1.25 | 12.00 | M12 fine; close match for precision work |
| 5/8″-18 UNF | 18 | 0.6250 | M16 x 1.5 | 1.50 | 16.00 | M16 fine; slightly larger diameter |
| 3/4″-16 UNF | 16 | 0.7500 | M20 x 1.5 | 1.50 | 20.00 | M20 fine; larger but closest standard |
Quick Answer: What Is the Metric Equivalent of an Imperial Thread?
A metric equivalent is the closest standard metric thread to an imperial (Unified) size by major diameter. They are reference matches, not drop-in replacements. The most common pairs are 1/4″-20 UNC ≈ M6 × 1.0 and #4-40 UNC ≈ M3 × 0.5. Designers use this chart to pick a near-size metric fastener when an imperial part is unavailable.
This chart lists major diameter and pitch in both systems so you can compare: imperial thread, threads per inch (TPI), major diameter in inches, closest metric size, pitch in mm and major diameter in mm. Imperial diameters follow ASME B1.1 and metric diameters follow ISO 261. To convert thread count to metric pitch: pitch (mm) = 25.4 ÷ TPI.
Common conversions: #4-40 ≈ M3 × 0.5 | 1/4″-20 ≈ M6 × 1.0 | 5/16″-18 ≈ M8 × 1.25 | 3/8″-16 ≈ M10 × 1.5 | 1/2″-13 ≈ M12 × 1.75. Metric and imperial threads are NOT interchangeable, the pitch and form differ.
Notes on This Chart
- Metric and imperial threads are NOT interchangeable even when diameters are close. Thread pitch and form differ.
- “Closest Metric” shows the nearest standard metric size by major diameter. Always verify fit before substitution.
- Imperial major diameters are per ASME B1.1. Metric diameters are per ISO 261.
- For numbered screws (#2 through #12), the major diameter in inches = 0.060 + (screw number x 0.013).
- TPI = Threads Per Inch. To convert to metric pitch: pitch (mm) = 25.4 / TPI.
Need metric or imperial threads machined?
Upload your CAD file for an instant quote. Free DFM review included with every order.
Notes on This Chart
Can I substitute a metric bolt for an imperial bolt?
Generally, metric and imperial fasteners should not be mixed. A similar major diameter does not mean the threads are compatible because the pitch and thread specifications can differ. The correct solution is to replace the mating nut or tapped hole as well as the bolt so that both use the same thread system. Trying to force mismatched threads together can damage the threads and compromise the joint.
What is the difference between UNC and UNF threads?
UNC, or Unified National Coarse, uses a lower thread count per inch and is widely used for general-purpose fastening in North America. UNF, or Unified National Fine, has more threads per inch, providing finer thread engagement and making it useful where vibration resistance or precise adjustment is important. UNC is generally easier to assemble, while UNF is often selected for applications requiring finer threads.
How do I measure thread pitch on an existing bolt?
For an imperial fastener, use a thread pitch gauge to determine the number of threads per inch (TPI). For metric threads, measure the distance between adjacent thread crests in millimeters. Measuring the bolt’s major diameter with calipers and comparing both measurements with a thread chart can then help identify the thread size.
Why do some metric and imperial threads have nearly identical diameters?
Metric and imperial thread systems use different standards, but some nominal sizes naturally fall very close to one another. For instance, a 1/4-inch thread has a major diameter of 6.35 mm, which is close to the 6.0 mm diameter of an M6 thread. However, similar diameters do not make the threads interchangeable because their pitches and thread specifications can differ.
What does TPI mean vs. pitch in mm?
TPI means Threads Per Inch and indicates how many thread crests are contained within one inch of an imperial thread. Metric threads instead use pitch, which is the distance in millimeters from one thread crest to the next. The two measurements can be converted using pitch (mm) = 25.4 ÷ TPI. For example, a 20 TPI thread has a pitch of 1.27 mm.