Drill Bit Size Chart
Look up number, letter, and fractional drill bit sizes. Find the diameter in inches and mm for over 40 common drill sizes used in CNC machining.
Standard Drill Bit Diameter Reference
| SIZE | DIAMETER (IN) | DIAMETER (MM) | CATEGORY |
| #60 | 0.0400 | 1.016 | Number |
| #57 | 0.0430 | 1.092 | Number |
| #56 | 0.0465 | 1.181 | Number |
| #55 | 0.0520 | 1.321 | Number |
| #54 | 0.0550 | 1.397 | Number |
| #53 | 0.0595 | 1.511 | Number |
| #50 | 0.0700 | 1.778 | Number |
| #48 | 0.0760 | 1.930 | Number |
| #44 | 0.0860 | 2.184 | Number |
| #43 | 0.0890 | 2.261 | Number |
| #40 | 0.0980 | 2.489 | Number |
| #36 | 0.1065 | 2.705 | Number |
| #33 | 0.1130 | 2.870 | Number |
| #29 | 0.1360 | 3.454 | Number |
| #25 | 0.1495 | 3.797 | Number |
| #21 | 0.1590 | 4.039 | Number |
| #16 | 0.1770 | 4.496 | Number |
| #11 | 0.1910 | 4.851 | Number |
| #7 | 0.2010 | 5.105 | Number |
| #3 | 0.2130 | 5.410 | Number |
| #1 | 0.2280 | 5.791 | Number |
| A | 0.2340 | 5.944 | Letter |
| D | 0.2460 | 6.248 | Letter |
| F | 0.2570 | 6.528 | Letter |
| H | 0.2660 | 6.756 | Letter |
| J | 0.2770 | 7.036 | Letter |
| L | 0.2900 | 7.366 | Letter |
| N | 0.3020 | 7.671 | Letter |
| P | 0.3230 | 8.204 | Letter |
| R | 0.3390 | 8.611 | Letter |
| T | 0.3580 | 9.093 | Letter |
| V | 0.3770 | 9.576 | Letter |
| X | 0.3970 | 10.084 | Letter |
| Z | 0.4130 | 10.490 | Letter |
| 1/16″ | 0.0625 | 1.588 | Fractional |
| 3/32″ | 0.0938 | 2.381 | Fractional |
| 1/8″ | 0.1250 | 3.175 | Fractional |
| 3/16″ | 0.1875 | 4.763 | Fractional |
| 1/4″ | 0.2500 | 6.350 | Fractional |
| 5/16″ | 0.3125 | 7.938 | Fractional |
| 3/8″ | 0.3750 | 9.525 | Fractional |
| 1/2″ | 0.5000 | 12.700 | Fractional |
| 3/4″ | 0.7500 | 19.050 | Fractional |
| 1″ | 1.0000 | 25.400 | Fractional |
Quick Answer: What Drill Bit Size Do I Need?
Drill bits come in four overlapping series so you can hit almost any diameter. Number drills run #1 (0.2280″) down to #80 (0.0135″), letter drills run A (0.234″) up to Z (0.413″), and fractional drills step in 1/64″ increments. Metric drills are sized directly in millimeters. Machinists, engineers and DIY builders use this chart to match a callout to the exact bit on hand.
This chart lists over 40 common drill bit sizes with: size designation, diameter in decimal inches and diameter in millimeters, grouped by category. Inputs are the size you are looking for (a number, letter or fraction) so you can search by callout like #7, 1/4 or A and read off the matching diameter.
Common sizes: #7 → 0.2010″ (5.105 mm) | 1/4″ → 0.2500″ (6.350 mm) | letter A → 0.2340″ (5.944 mm) | 1/8″ → 0.1250″ (3.175 mm) | 1/2″ → 0.5000″ (12.700 mm) | number drills #1–#80, letter drills A–Z.
Notes on This Drill Bit Size Chart
- Number drill bits run from #1 (largest) to #80 (smallest). Only key sizes are shown.
- Letter drill bits run from A (smallest) to Z (largest).
- Fractional drill bit sizes are the most common in general machining.
- For tap drill bit sizes, cross-reference this chart with a thread pitch chart.
Need precision holes in your parts?
Upload your CAD file for an instant quote. Free DFM review included with every order.
Frequently Asked Questions
What are number drill sizes?
Number drill sizes are identified by numbers, typically ranging from #1 to #80. As the drill number increases, the drill diameter becomes smaller. These sizes are often used for precision drilling, tap holes, and applications where fractional sizes do not provide the required diameter.
What are letter drill sizes?
Letter drill sizes use letters from A to Z to represent specific diameters between common fractional sizes. They are widely used in machining for tapping operations, clearance holes, and applications requiring intermediate drill sizes.
How do I choose the correct tap drill size?
Select the thread size required for your application and refer to a tap drill size chart to find the matching drill diameter. The correct tap drill creates enough material for the tap to form threads while maintaining proper thread strength. A standard 75% thread engagement is suitable for most applications.
What is the difference between jobber length and screw machine length drills?
Jobber length drills are the most common general-purpose drill style and provide a good balance of reach and rigidity. Screw machine length drills are shorter with increased stiffness, helping reduce tool deflection and improve stability in CNC machining operations.