Dowel Pin Size Chart
Reference chart for standard and oversized dowel pin dimensions with recommended hole sizes and tolerances. Covers 1/16″ through 3/4″ standard pins, oversized (+0.001″) variants, and M2 through M16 metric pins per ASME B18.8.2.
Dowel Pin Size Chart
| PIN DIAMETER | PIN LENGTH RANGE | HOLE SIZE (REAM) | HOLE TOLERANCE | CHAMFER | MATERIAL |
| 1/16″ | 3/16″–1/2″ | 0.0625″ | +0.0000 / +0.0002 | 0.015″ | Alloy Steel, RC 60 |
| 3/32″ | 1/4″–3/4″ | 0.0938″ | +0.0000 / +0.0002 | 0.015″ | Alloy Steel, RC 60 |
| 1/8″ | 1/4″–1-1/2″ | 0.1250″ | +0.0000 / +0.0002 | 0.015″ | Alloy Steel, RC 60 |
| 5/32″ | 3/8″–1-1/2″ | 0.1563″ | +0.0000 / +0.0002 | 0.015″ | Alloy Steel, RC 60 |
| 3/16″ | 3/8″–2″ | 0.1875″ | +0.0000 / +0.0002 | 0.015″ | Alloy Steel, RC 60 |
| 1/4″ | 1/2″–3″ | 0.2500″ | +0.0000 / +0.0002 | 0.020″ | Alloy Steel, RC 60 |
| 5/16″ | 1/2″–3″ | 0.3125″ | +0.0000 / +0.0002 | 0.020″ | Alloy Steel, RC 60 |
| 3/8″ | 3/4″–3″ | 0.3750″ | +0.0000 / +0.0003 | 0.025″ | Alloy Steel, RC 60 |
| 7/16″ | 3/4″–3″ | 0.4375″ | +0.0000 / +0.0003 | 0.025″ | Alloy Steel, RC 60 |
| 1/2″ | 3/4″–4″ | 0.5000″ | +0.0000 / +0.0003 | 0.030″ | Alloy Steel, RC 60 |
| 5/8″ | 1″–4″ | 0.6250″ | +0.0000 / +0.0003 | 0.030″ | Alloy Steel, RC 60 |
| 3/4″ | 1″–4″ | 0.7500″ | +0.0000 / +0.0004 | 0.035″ | Alloy Steel, RC 60 |
| 1/8″ (+0.001) | 1/4″–1-1/2″ | 0.1260″ | +0.0000 / +0.0002 | 0.015″ | Alloy Steel, RC 60 |
| 3/16″ (+0.001) | 3/8″–2″ | 0.1885″ | +0.0000 / +0.0002 | 0.015″ | Alloy Steel, RC 60 |
| 1/4″ (+0.001) | 1/2″–3″ | 0.2510″ | +0.0000 / +0.0002 | 0.020″ | Alloy Steel, RC 60 |
| 5/16″ (+0.001) | 1/2″–3″ | 0.3135″ | +0.0000 / +0.0002 | 0.020″ | Alloy Steel, RC 60 |
| 3/8″ (+0.001) | 3/4″–3″ | 0.3760″ | +0.0000 / +0.0003 | 0.025″ | Alloy Steel, RC 60 |
| 1/2″ (+0.001) | 3/4″–4″ | 0.5010″ | +0.0000 / +0.0003 | 0.030″ | Alloy Steel, RC 60 |
| 5/8″ (+0.001) | 1″–4″ | 0.6260″ | +0.0000 / +0.0003 | 0.030″ | Alloy Steel, RC 60 |
| 3/4″ (+0.001) | 1″–4″ | 0.7510″ | +0.0000 / +0.0004 | 0.035″ | Alloy Steel, RC 60 |
| M2 | 6–16 mm | 2.000 mm | +0.000 / +0.006 | 0.3 mm | Alloy Steel, 58 HRC |
| M3 | 8–24 mm | 3.000 mm | +0.000 / +0.006 | 0.4 mm | Alloy Steel, 58 HRC |
| M4 | 10–32 mm | 4.000 mm | +0.000 / +0.008 | 0.5 mm | Alloy Steel, 58 HRC |
| M5 | 12–40 mm | 5.000 mm | +0.000 / +0.008 | 0.5 mm | Alloy Steel, 58 HRC |
| M6 | 14–50 mm | 6.000 mm | +0.000 / +0.008 | 0.6 mm | Alloy Steel, 58 HRC |
| M8 | 16–60 mm | 8.000 mm | +0.000 / +0.009 | 0.8 mm | Alloy Steel, 58 HRC |
| M10 | 20–80 mm | 10.000 mm | +0.000 / +0.009 | 1.0 mm | Alloy Steel, 58 HRC |
| M12 | 24–100 mm | 12.000 mm | +0.000 / +0.011 | 1.2 mm | Alloy Steel, 58 HRC |
| M16 | 32–120 mm | 16.000 mm | +0.000 / +0.011 | 1.5 mm | Alloy Steel, 58 HRC |
Quick Answer: What Hole Size Do I Ream for a Dowel Pin?
A dowel pin is a precision ground cylinder that locates and aligns two parts. For a press fit, ream the hole to the nominal pin diameter with a tight plus tolerance so the slightly oversized pin creates an interference fit. A 1/4″ pin needs a 0.2500″ hole reamed to +0.0000 / +0.0002″. Holes must be reamed, not just drilled.
This chart lists dowel pin dimensions per ASME B18.8.2 with: pin diameter, pin length range, reamed hole size, hole tolerance, chamfer and material. Inputs include the nominal pin diameter and whether you need a standard, oversized (+0.001″) or metric pin. Search by pin diameter.
Common sizes: 1/8″ → 0.1250″ hole (+0.0000 / +0.0002) | 1/4″ → 0.2500″ hole (+0.0000 / +0.0002) | 1/2″ → 0.5000″ hole (+0.0000 / +0.0003) | M6 → 6.000 mm hole | oversized adds 0.001″ for worn-hole repair | alloy steel RC 60.
Notes on This Chart
- Standard dowel pin dimensions per ASME B18.8.2.
- Pin diameter tolerance is typically +0.0001 / +0.0003″ for standard pins.
- Oversized pins are 0.001″ larger for repair or tighter press fits.
- Metric dowel pins per ISO 2338 (unhardened) and ISO 8734 (hardened).
- Always ream holes; do not rely on drilled hole size for press fits. Refer to our drill bit size chartfor the correct undersize drill before reaming.
- For blind dowel holes, specify a flat-ground vent or a pull-dowel pin to prevent air compression lock during insertion.
Need Dowel Pin Bores Machined for Fixtures or Robotic Tooling?
We machine high-precision slip and press-fit dowel holes using CNC reamers. Upload your assembly CAD files for an instant quote.
Frequently Asked Questions
What is the correct hole size for a dowel pin?
For a standard press-fit dowel pin, the hole should be reamed to the specified diameter and tolerance for the pin and fit being used. For example, a 1/4-inch dowel pin may use a 0.2500–0.2502-inch reamed hole for a specified press-fit application. Always confirm the required hole tolerance against the applicable pin standard and fit specification.
What is the difference between standard and oversized dowel pins?
Standard dowel pins are manufactured around their nominal diameter within a specified tolerance. Oversized dowel pins are manufactured slightly larger than the nominal size and can be used to restore a worn hole or create a tighter fit without replacing the entire component. The actual oversize designation and tolerance depend on the applicable dowel pin standard.
How do I remove a press-fit dowel pin?
Press-fit dowel pins can typically be removed with a suitable pin punch and hammer by driving the pin out from the accessible side. For blind holes or difficult-to-access pins, a dedicated dowel pin extractor or puller may be required. Take care to avoid damaging the reamed hole, particularly when the hole will be reused.
What material are dowel pins typically made from?
Standard dowel pins are commonly manufactured from hardened alloy steel, with hardness typically around Rockwell C60 depending on the applicable standard. Stainless steel dowel pins, including grades such as 18-8 and 416 stainless steel, are also available for applications requiring improved corrosion resistance. Precision grinding provides consistent diameter and surface quality.
Should dowel pin holes be drilled or reamed?
Dowel pin holes should generally be drilled undersize and then reamed to the required final diameter and tolerance. Drilling alone may not provide the dimensional accuracy, roundness, or surface finish required for a precision pin fit. Reaming produces a more accurate and consistent hole for proper dowel pin installation.