Copper & Brass Alloy Grades Chart

Compare copper, brass, and bronze alloy grades with mechanical properties, machinability ratings, and electrical conductivity. Covers C110, C101, C360, C260, C172, C510, C630, C954, C715, and more.

Copper & Brass Alloy Grades Chart

COMMON NAME TENSILE (KSI) YIELD (KSI) HARDNESS (HRB) MACHINABILITY (%) CONDUCTIVITY (% IACS) COMMON USES
C110 – ETP Copper 32–50 10–40 10–65 20 101 Bus bars, electrical connectors, heat sinks
C101 – OFE Copper 32–45 10–36 10–60 20 101 Semiconductor, vacuum, superconductors
C102 – OFHC Copper 32–45 10–36 10–60 20 101 Waveguides, high-purity applications
C360 – Free-Cutting Brass 49–68 18–45 55–80 100 26 Screw machine products, fittings, valves
C260 – Cartridge Brass (70/30) 44–76 15–60 35–82 30 28 Cartridge cases, hardware, radiator cores
C230 – Red Brass (85/15) 40–70 12–55 30–75 30 37 Plumbing, weather stripping, conduit
C353 – High-Leaded Brass 45–60 15–40 50–70 90 26 Clock gears, watch parts, engraving
C385 – Architectural Bronze 50–65 20–45 55–75 80 25 Hinges, lock bodies, architectural trim
C172 – Beryllium Copper 68–200 30–175 60–43 HRC 20 22 Springs, mold inserts, non-spark tools
C510 – Phosphor Bronze A 47–100 19–76 40–95 20 15 Bearings, springs, electrical contacts
C544 – Free-Cut Phosphor Bronze 50–75 20–55 45–80 80 12 Screw machine bearings, bushings
C630 – Aluminum Bronze (Cu-Al) 80–100 35–50 80–92 20 7 Marine hardware, pump components
C954 – Aluminum Bronze (cast) 75–95 30–45 70–88 50 7 Bearings, gears, wear plates, valves
C715 – Copper-Nickel 70/30 54–75 18–55 40–78 20 4 Marine, desalination, heat exchangers
C932 – SAE 660 Bearing Bronze 35–40 17–20 55–65 60 7 Bushings, bearings, washers

Quick Answer: Which Copper or Brass Alloy Should I Use?

Pick C110 ETP copper for electrical and thermal jobs (101% IACS conductivity). Pick C360 free-cutting brass for high-volume machined parts (100% machinability, the benchmark grade). Pick C172 beryllium copper for high-strength springs and contacts (up to 200 ksi tensile). Pick phosphor or aluminum bronze (C510, C630, C954) for wear, bearing and marine parts.

This chart compares 15 copper, brass and bronze grades with: tensile strength, yield strength, hardness (HRB), machinability rated against C360, electrical conductivity in % IACS and common uses. Search by alloy number like C360 or by common name like free-cutting brass.

Common picks: C110 ETP copper, 101% IACS, machinability 20% | C360 brass, machinability 100%, 49–68 ksi tensile | C172 beryllium copper, 68–200 ksi tensile | C510 phosphor bronze, bearings & springs | C715 copper-nickel 70/30, marine | machinability scale: C360 = 100%.

Notes on This Chart

  • Mechanical properties vary by temper and form (rod, bar, sheet, plate).
  • Machinability is rated relative to C360 free-cutting brass = 100%.
  • Conductivity is expressed as % IACS (International Annealed Copper Standard).
  • C172 beryllium copper requires safety precautions during machining due to toxic dust.
  • Always verify specific properties with the material supplier’s mill cert.

Need copper alloy parts machined?

Upload your CAD file for an instant quote. Free DFM review included with every order.

Frequently Asked Questions

What is the most machinable copper alloy?

C360 free-cutting brass offers the highest machinability among the alloys in this chart, with a benchmark rating of 100%. Its lead content improves chip breaking and allows efficient high-speed machining, making C360 well suited for screw machine parts, fittings, valves, and high-volume turned components.

C110 ETP copper provides excellent electrical conductivity and is widely used for bus bars, connectors, and heat sinks. C101 OFE copper has a higher purity and extremely low oxygen content, making it better suited for high-purity, vacuum, semiconductor, and superconducting applications.

Choose C172 beryllium copper when a part requires high strength, electrical conductivity, corrosion resistance, and non-sparking properties. It is commonly used for springs, electrical contacts, mold inserts, and specialized tools. Because beryllium-containing dust can be hazardous, machining requires appropriate ventilation and safety controls.

Phosphor bronze provides a combination of wear resistance, fatigue strength, corrosion resistance, and machinability. C510 and C544 are commonly used for bushings, bearings, springs, electrical contacts, and other precision components. C544 is a free-cutting grade designed for improved machining performance.

Yes, but corrosion resistance varies by brass alloy and environment. C260 and C360 provide moderate corrosion resistance, while C230 red brass, C630 and C954 aluminum bronze, and C715 copper-nickel offer better performance in demanding environments. C715 copper-nickel is particularly well suited to marine and seawater applications.

Scroll to Top