Bearing Fit Chart
Recommended shaft and housing fits for standard ball bearings by bore size, load type, and application. Covers bearing bores from 10mm through 120mm with ISO tolerance classes per ISO 286.
Bearing Fit Chart
| BEARING BORE (MM) | FIT CLASS | TOLERANCE (MM) | FIT TYPE | LOAD TYPE | APPLICATION |
| 10 | g6 | -5 / -14 | Shaft – Clearance | Stationary inner ring | Idler pulleys, non-rotating shafts |
| 10 | h6 | 0 / -9 | Shaft – Sliding | Light load, easy assembly | Instruments, light-duty equipment |
| 10 | j5 | +5 / -4 | Shaft – Transition | Normal rotating load | Electric motors, pumps |
| 10 | k5 | +9 / 0 | Shaft – Interference | Normal to heavy load | General machinery, gearboxes |
| 10 | m5 | +15 / +6 | Shaft – Interference | Heavy / impact load | Heavy-duty drives, vibrating equipment |
| 25 | g6 | -7 / -20 | Shaft – Clearance | Stationary inner ring | Idler pulleys, conveyor rollers |
| 25 | h6 | 0 / -13 | Shaft – Sliding | Light load, easy assembly | Instruments, light-duty spindles |
| 25 | j5 | +6 / -5 | Shaft – Transition | Normal rotating load | Electric motors, fans |
| 25 | k5 | +13 / +2 | Shaft – Interference | Normal to heavy load | General machinery, gearboxes |
| 25 | m5 | +20 / +9 | Shaft – Interference | Heavy / impact load | Rolling mills, heavy-duty drives |
| 25 | n6 | +28 / +15 | Shaft – Interference | Very heavy / shock load | Traction motors, crushers |
| 50 | g6 | -9 / -25 | Shaft – Clearance | Stationary inner ring | Idler wheels, tensioners |
| 50 | h6 | 0 / -16 | Shaft – Sliding | Light load, easy assembly | Precision instruments |
| 50 | j5 | +7 / -6 | Shaft – Transition | Normal rotating load | Spindles, electric motors |
| 50 | k5 | +18 / +5 | Shaft – Interference | Normal to heavy load | General machinery, turbines |
| 50 | m5 | +25 / +12 | Shaft – Interference | Heavy / impact load | Rolling mills, compressors |
| 80 | j5 | +9 / -6 | Shaft – Transition | Normal rotating load | Large motors, machine spindles |
| 80 | k5 | +21 / +6 | Shaft – Interference | Normal to heavy load | Gearboxes, large machinery |
| 80 | m5 | +30 / +15 | Shaft – Interference | Heavy / impact load | Heavy-duty industrial drives |
| 120 | k5 | +25 / +7 | Shaft – Interference | Normal to heavy load | Large turbines, wind generators |
| 120 | m5 | +36 / +18 | Shaft – Interference | Heavy / impact load | Mining equipment, large drives |
| 10–25 | H7 | +21 / 0 | Housing – Clearance | Stationary outer ring, light load | General housings, easy assembly |
| 10–25 | J7 | +12 / -9 | Housing – Transition | Normal load, non-separable | Gearbox housings, pump bodies |
| 10–25 | K7 | +6 / -15 | Housing – Transition | Normal to heavy load | Electric motor end bells |
| 10–25 | M7 | 0 / -21 | Housing – Interference | Heavy load, rotating outer ring | Wheel hubs, heavy machinery |
| 25–50 | H7 | +25 / 0 | Housing – Clearance | Stationary outer ring, light load | General housings, easy assembly |
| 25–50 | J7 | +14 / -11 | Housing – Transition | Normal load | Gearbox housings, pump bodies |
| 25–50 | M7 | 0 / -25 | Housing – Interference | Heavy load, rotating outer ring | Wheel hubs, conveyor pulleys |
| 50–80 | H7 | +30 / 0 | Housing – Clearance | Stationary outer ring, light load | General housings |
| 50–80 | M7 | 0 / -30 | Housing – Interference | Heavy load, rotating outer ring | Large wheel hubs, heavy machinery |
| 80–120 | H7 | +35 / 0 | Housing – Clearance | Stationary outer ring, light load | Large housings, split housings |
| 80–120 | N7 | -5 / -40 | Housing – Interference | Heavy / shock load | Mining, heavy industrial |
| 80–120 | P7 | -14 / -49 | Housing – Heavy interference | Very heavy / shock load | Traction motors, crushers |
Quick Answer: What Fit Do I Use for a Bearing?
Apply an interference (press) fit to the bearing ring that rotates relative to the load and a clearance fit to the ring that stays stationary. For a rotating shaft with a stationary outer ring, the standard is an interference fit on the shaft (k5 or m5) and a clearance fit in the housing (H7 or J7). Shaft fits use lowercase ISO 286 codes and housing fits use uppercase codes.
This chart lists recommended shaft and housing fits for standard ball bearings by bore size, with: ISO tolerance class, tolerance deviation in micrometers, fit type, load type and typical application. Inputs include the bearing bore diameter, which ring rotates and the load severity. It covers bores from 10 mm through 120 mm per ISO 286.
Common fits: light or stationary load → g6 or h6 shaft, H7 housing | normal rotating load → j5 or k5 shaft, J7 housing | heavy or impact load → m5 or n6 shaft, M7 or N7 housing | shaft seat finish Ra 0.8 µm (32 µin) | housing bore finish Ra 1.6 µm (63 µin) | roundness IT5–IT6.
Notes on This Chart
- Shaft tolerance classes per ISO 286-1. Lowercase letters denote shaft fits.
- Housing tolerance classes per ISO 286-1. Uppercase letters denote housing fits.
- Tolerance values shown are deviations from nominal in micrometers (µm).
- For rotating inner ring with stationary load direction, use interference fit on the shaft.
- Always consult bearing manufacturer catalogs for specific application recommendations.
Need precision bearing housings machined?
Upload your CAD file for an instant quote. Free DFM review included with every order.
Frequently Asked Questions
What is the difference between a bearing shaft fit and a housing fit?
A shaft fit defines the tolerance of the shaft seat where the bearing inner ring is installed. A housing fit defines the tolerance of the housing bore that supports the outer ring. Shaft fits typically use lowercase ISO tolerance designations such as g6, h6, j5, and k5, while housing fits use uppercase designations such as H7, J7, K7, and M7.
When should I use an interference fit or a clearance fit for a bearing?
An interference fit is generally used on the bearing ring that rotates relative to the applied load to prevent ring creep. For a typical rotating shaft, this often means an interference fit such as k5 or m5 on the shaft and a clearance fit such as H7 in the housing. If the housing rotates instead, the fit arrangement is normally reversed.
What do the ISO tolerance codes mean for bearing fits?
An ISO fit designation consists of a letter and a tolerance grade number. The letter identifies the position of the tolerance zone relative to the nominal dimension, while the number defines the tolerance grade. Lower grade numbers indicate tighter tolerances. For example, k5 represents a shaft tolerance zone positioned above nominal with an IT5 tolerance grade.
How does the load condition affect bearing fit selection?
Bearing fit selection depends on load magnitude, direction, rotation, and operating conditions. Lighter loads may allow looser fits such as g6 or h6 for easier assembly, while normal rotating loads commonly use j5 or k5. Heavy or impact loads may require tighter fits such as m5 or n6 to reduce the risk of bearing ring creep. Housing fits are selected using the same principles.
What surface finish is recommended for bearing seats?
Bearing seating surfaces should have a smooth, consistent finish to ensure proper contact and load distribution. A shaft bearing seat is commonly specified around Ra 0.8 μm (32 μin) or better, while housing bores may use Ra 1.6 μm (63 μin) or better. Roundness and cylindricity should also be controlled according to the bearing and application requirements.