Anodizing Color & Thickness Chart

Visual reference for anodizing types, available colors, thickness ranges, and specifications for aluminum parts. Covers Type II (decorative) and Type III (hardcoat) anodizing per MIL-PRF-8625.

Anodizing Color & Thickness Chart

COLOR TYPE THICKNESS RANGE (MILS) THICKNESS (MM) HARDNESS (HV) SPEC REFERENCE BEST FOR
Clear Type II0.2 – 1.05 – 25200 – 400 MIL-PRF-8625 Type II, Class 1General protection, clear cosmetic finish
Black Type II0.3 – 1.08 – 25200 – 400 MIL-PRF-8625 Type II, Class 2Consumer electronics, tactical, instruments
Red Type II0.3 – 0.88 – 20200 – 400 MIL-PRF-8625 Type II, Class 2Safety markings, consumer products, branding
Blue Type II0.3 – 0.88 – 20200 – 400 MIL-PRF-8625 Type II, Class 2Aerospace identification, consumer goods
Gold Type II0.3 – 0.88 – 20200 – 400 MIL-PRF-8625 Type II, Class 2Decorative, premium consumer products
Green Type II0.3 – 0.88 – 20200 – 400 MIL-PRF-8625 Type II, Class 2Military, color coding, branding
Grey Type II0.3 – 0.88 – 20200 – 400 MIL-PRF-8625 Type II, Class 2Industrial, understated cosmetic finish
Orange Type II0.3 – 0.88 – 20200 – 400 MIL-PRF-8625 Type II, Class 2Safety markings, high visibility parts
Purple Type II0.3 – 0.88 – 20200 – 400 MIL-PRF-8625 Type II, Class 2Custom branding, consumer electronics
Bronze Type II0.3 – 0.88 – 20200 – 400 MIL-PRF-8625 Type II, Class 2Architectural, decorative hardware
Clear (Natural) Type III1.0 – 4.025 – 100400 – 700 MIL-PRF-8625 Type III, Class 1Wear surfaces, sliding fits, military
Black Type III1.0 – 4.025 – 100400 – 700 MIL-PRF-8625 Type III, Class 2Firearms, aerospace, high-wear components
Dark Grey Type III1.0 – 3.025 – 75400 – 700 MIL-PRF-8625 Type III, Class 2Industrial wear parts, defense applications

Quick Answer: What Is the Difference Between Type II and Type III Anodizing?

Anodizing is an electrochemical finish that grows a hard oxide layer on aluminum. Type II (sulfuric acid) is decorative and mildly protective at 0.2–1.0 mils thick and takes a wide range of dye colors. Type III (hardcoat) is thicker at 1.0–4.0 mils and much harder at 400–700 HV, giving superior wear resistance but only darker colors. Both follow MIL-PRF-8625.

This chart lists anodize types, colors, thickness ranges and hardness with: dye color, anodize type, thickness in mils and microns, Vickers hardness, MIL-PRF-8625 spec reference and best-use application. Inputs include the color you want and whether you need a Type II decorative or Type III hardcoat finish.

Key facts: Type II 0.2–1.0 mils (5–25 µm), 200–400 HV, full color range | Type III 1.0–4.0 mils (25–100 µm), 400–700 HV, black, dark grey and natural | dimensional growth ≈ 50% of total thickness per side | 6061-T6 gives the most uniform color.

Notes on This Chart

  • All specifications reference MIL-PRF-8625 (formerly MIL-A-8625). Class 1 = undyed, Class 2 = dyed.
  • Hardness values are Vickers (HV). Type III hardcoat can reach 65-70 HRC equivalent.
  • Actual color appearance varies by alloy, temper, and surface finish. 6061-T6 produces the most uniform colors.
  • Dimensional growth is approximately 50% of total coating thickness per side.
  • Color swatches are approximate representations. Request samples from your anodizer for critical color matching.

Need Custom Anodized Aluminum CNC Parts?

We machine and anodize parts to MIL-A-8625 Type II & Type III specifications, with custom multi-color dyeing and precision masking. Upload your CAD drawings for a quote.

Frequently Asked Questions

What is the difference between Type II and Type III anodizing?

Type II anodizing provides a decorative finish with moderate protection against corrosion and wear. Typical coating thickness ranges from 0.2 to 1.0 mils, and it supports a wide variety of dye colors. Type III, also known as hardcoat anodizing, produces a significantly thicker and harder coating, typically 1.0 to 4.0 mils with hardness around 400–700 HV. It offers superior wear and abrasion resistance but generally has a more limited color range, such as black, dark gray, and natural finishes.

Most aluminum alloys can undergo anodizing. 5xxx and 6xxx series alloys, including 5052 and 6061, generally produce more consistent and uniform finishes. 2xxx and 7xxx series alloys, such as 2024 and 7075, can also be anodized, although their higher copper or zinc content may result in greater color variation. Cast aluminum alloys typically produce less uniform finishes than wrought alloys.

Anodizing changes the dimensions of the original machined surface because the coating grows both into the aluminum substrate and outward from the surface. As a general guideline, approximately 50% of the coating thickness penetrates into the base material and 50% builds above the original surface. For example, a 0.5-mil Type II coating may result in approximately 0.25 mil of dimensional growth per side, while a 2.0-mil Type III coating may result in approximately 1.0 mil per side. Critical dimensions should therefore account for the expected coating growth during CNC machining and finishing.

Anodized color matching can be challenging because the final appearance depends on factors such as aluminum alloy, temper, surface finish, and anodizing bath chemistry. Even parts processed together can show slight color differences when different alloys are used. For more consistent results, use the same alloy and temper throughout the project and provide a physical color sample or Pantone reference for the anodizing supplier to match.

MIL-PRF-8625 is the primary military specification covering anodic coatings on aluminum and aluminum alloys. It defines Type I chromic acid anodizing, Type II sulfuric acid anodizing, and Type III hardcoat anodizing, along with Class 1 non-dyed and Class 2 dyed finishes. When anodizing is required for aerospace, defense, or other demanding applications, specifying the applicable MIL-PRF-8625 type and class helps establish consistent coating requirements.

Scroll to Top