Fastener Torque Chart
Look up recommended bolt and screw torque values by fastener size, grade, and lubrication condition. This chart covers SAE Grade 5, Grade 8, Metric 8.8, 10.9, and stainless steel fasteners with both dry and lubricated torque specs.
Fastener Torque Chart
| FASTENER SIZE | THREAD PITCH | DRY TORQUE (FT-LBS) | DRY TORQUE (N-M) | LUBRICATED TORQUE (FT-LBS) | LUBRICATED TORQUE (N-M) | CLAMP LOAD (LBS) |
| 1/4″-20 | 20 TPI | 8 | 11 | 6 | 8 | 2,025 |
| 5/16″-18 | 18 TPI | 17 | 23 | 13 | 18 | 3,340 |
| 3/8″-16 | 16 TPI | 31 | 42 | 23 | 31 | 4,950 |
| 7/16″-14 | 14 TPI | 49 | 66 | 37 | 50 | 6,800 |
| 1/2″-13 | 13 TPI | 75 | 102 | 56 | 76 | 9,100 |
| 9/16″-12 | 12 TPI | 110 | 149 | 83 | 113 | 11,800 |
| 5/8″-11 | 11 TPI | 150 | 203 | 113 | 153 | 14,750 |
| 3/4″-10 | 10 TPI | 270 | 366 | 200 | 271 | 21,750 |
| 7/8″-9 | 9 TPI | 400 | 542 | 300 | 407 | 28,600 |
| 1″-8 | 8 TPI | 580 | 786 | 435 | 590 | 36,750 |
| 1/4″-20 | 20 TPI | 12 | 16 | 9 | 12 | 2,850 |
| 5/16″-18 | 18 TPI | 24 | 33 | 18 | 24 | 4,700 |
| 3/8″-16 | 16 TPI | 44 | 60 | 33 | 45 | 7,000 |
| 7/16″-14 | 14 TPI | 70 | 95 | 52 | 71 | 9,600 |
| 1/2″-13 | 13 TPI | 105 | 142 | 79 | 107 | 12,850 |
| 9/16″-12 | 12 TPI | 155 | 210 | 116 | 157 | 16,650 |
| 5/8″-11 | 11 TPI | 210 | 285 | 158 | 214 | 20,800 |
| 3/4″-10 | 10 TPI | 380 | 515 | 285 | 386 | 30,700 |
| 7/8″-9 | 9 TPI | 600 | 813 | 450 | 610 | 40,400 |
| 1″-8 | 8 TPI | 820 | 1112 | 615 | 834 | 51,900 |
| M6 | 1.0 mm | 7 | 9.5 | 5 | 7 | 1,800 |
| M8 | 1.25 mm | 17 | 23 | 13 | 17 | 3,350 |
| M10 | 1.5 mm | 34 | 46 | 25 | 34 | 5,400 |
| M12 | 1.75 mm | 59 | 80 | 44 | 60 | 7,800 |
| M16 | 2.0 mm | 142 | 193 | 107 | 145 | 14,200 |
| M20 | 2.5 mm | 280 | 380 | 210 | 285 | 22,400 |
| M24 | 3.0 mm | 480 | 651 | 360 | 488 | 32,000 |
| M6 | 1.0 mm | 10 | 14 | 8 | 10 | 2,550 |
| M8 | 1.25 mm | 25 | 34 | 19 | 25 | 4,750 |
| M10 | 1.5 mm | 49 | 66 | 37 | 50 | 7,600 |
| M12 | 1.75 mm | 84 | 114 | 63 | 85 | 11,000 |
| M16 | 2.0 mm | 202 | 274 | 152 | 206 | 20,100 |
| M20 | 2.5 mm | 397 | 538 | 298 | 404 | 31,600 |
| M24 | 3.0 mm | 684 | 928 | 513 | 696 | 45,200 |
| 1/4″-20 (18-8) | 20 TPI | 6 | 8 | 5 | 7 | 1,500 |
| 5/16″-18 (18-8) | 18 TPI | 12 | 16 | 9 | 12 | 2,450 |
| 3/8″-16 (18-8) | 16 TPI | 22 | 30 | 17 | 23 | 3,700 |
| 1/2″-13 (18-8) | 13 TPI | 54 | 73 | 41 | 56 | 6,700 |
| 5/8″-11 (18-8) | 11 TPI | 107 | 145 | 80 | 108 | 10,800 |
| 3/4″-10 (18-8) | 10 TPI | 192 | 260 | 144 | 195 | 15,800 |
Quick Answer: How Much Torque Do I Use on a Bolt?
Bolt torque is the rotational force you apply to a fastener to stretch it and produce clamp load, the tension that actually holds a joint together. The correct value depends on fastener size, strength grade and whether the threads are dry or lubricated. As a reference, a dry 1/4″-20 SAE Grade 5 bolt takes about 8 ft-lbs, while a dry 1/2″-13 Grade 8 bolt takes about 105 ft-lbs.
This chart lists recommended tightening torque and clamp load by fastener size for SAE Grade 5, SAE Grade 8, Metric 8.8, Metric 10.9 and 18-8 stainless steel. Inputs include fastener size, thread pitch and lubrication condition, with both dry and lubricated values shown in ft-lbs and N·m. Search by callout like 1/4-20 or M8.
Common dry torque values: 1/4″-20 Grade 5 → 8 ft-lbs (11 N·m) | 3/8″-16 Grade 5 → 31 ft-lbs (42 N·m) | M8 class 8.8 → 17 ft-lbs (23 N·m) | M10 class 10.9 → 49 ft-lbs (66 N·m) | reduce 18-8 stainless by 20–25% and use anti-seize.
Notes on This Chart
- Torque values are for standard hex head bolts with plain (unplated) finish unless noted.
- Lubricated values assume light machine oil or wax-type coating on threads and under the bolt head.
- Clamp load is the approximate bolt tension at the listed dry torque value.
- Stainless steel values are for 18-8 (304) alloy. Use anti-seize to prevent galling.
- Always verify torque specs against the manufacturer’s recommendations for critical applications.
Subscribe For Newsletter
Sign up now for updates about early registration. A wonderful serenity taken possession into entire soul also like.
Frequently Asked Questions
What is the difference between dry and lubricated torque values?
Dry torque specifications are based on fasteners with clean, unlubricated threads and bearing surfaces. Lubricated values apply when oil, wax, anti-seize, or another lubricant is present, reducing thread friction. Since less torque is needed to produce the same clamp load under lubricated conditions, applying a dry torque value to a lubricated fastener can result in excessive tightening and fastener stress.
What is clamp load and why does it matter?
Clamp load is the tensile force generated in a fastener as it is tightened, creating the force that holds the joint components together. Torque is simply the tightening input used to generate this force. Maintaining the proper clamp load helps prevent loosening caused by vibration and keeps the joint secure when subjected to operating loads.
What is the difference between SAE Grade 5 and Grade 8 bolts?
SAE Grade 5 bolts typically use medium-carbon steel and have a minimum tensile strength of 120,000 PSI. Grade 8 fasteners are made from alloy steel and have a higher minimum tensile strength of 150,000 PSI. As a result, Grade 8 bolts can withstand greater torque and clamp loads. Grade 5 is commonly selected for general-purpose fastening, while Grade 8 is better suited to higher-demand structural and automotive applications.
How do metric property classes 8.8 and 10.9 compare to SAE grades?
Metric property class 8.8 provides a tensile strength of approximately 830 MPa (about 120,000 PSI), making it broadly comparable to SAE Grade 5 in tensile strength. Class 10.9 reaches approximately 1,040 MPa (about 150,000 PSI), placing it roughly in the range of SAE Grade 8. In the metric designation, the first number represents one-hundredth of the nominal minimum tensile strength in MPa.
Should I use anti-seize when torquing stainless steel fasteners?
Using anti-seize or another suitable thread lubricant is recommended for many stainless steel fasteners because they can experience galling during tightening. Lubrication reduces thread friction and helps produce a more predictable clamp load while lowering the risk of thread seizure. Because lubricated threads require less torque, the specified torque should be adjusted accordingly; as a general guideline, reducing the dry torque value by approximately 20–25% may be appropriate, but the lubricant manufacturer’s recommendations should take precedence.