Tolerance Fit Chart

Find hole and shaft tolerances for clearance, transition, and interference fits. Covers RC, LC, LT, LN, and FN fit classes for nominal sizes 0.5″ to 3.0″.

Tolerance Fit Chart

NOMINAL SIZE(IN) FIT TYPE HOLE TOLERANCE SHAFT TOLERANCE MIN CLEAR./INTERF. MAX CLEAR./INTERF.
0.5″ RC1 (Close sliding) +0.0000 / +0.0004 -0.0002 / -0.0004 +0.0002 +0.0008
0.5″ RC4 (Running) +0.0000 / +0.0007 -0.0005 / -0.0010 +0.0005 +0.0017
0.5″ RC7 (Free running) +0.0000 / +0.0012 -0.0010 / -0.0019 +0.0010 +0.0031
0.5″ LC2 (Locational) +0.0000 / +0.0004 -0.0000 / -0.0004 +0.0000 +0.0008
1.0″ RC1 (Close sliding) +0.0000 / +0.0005 -0.0003 / -0.0005 +0.0003 +0.0010
1.0″ RC4 (Running) +0.0000 / +0.0008 -0.0006 / -0.0012 +0.0006 +0.0020
1.0″ RC7 (Free running) +0.0000 / +0.0014 -0.0012 / -0.0023 +0.0012 +0.0037
1.0″ LC2 (Locational) +0.0000 / +0.0005 -0.0000 / -0.0005 +0.0000 +0.0010
2.0″ RC1 (Close sliding) +0.0000 / +0.0006 -0.0003 / -0.0006 +0.0003 +0.0012
2.0″ RC4 (Running) +0.0000 / +0.0010 -0.0007 / -0.0014 +0.0007 +0.0024
2.0″ RC7 (Free running) +0.0000 / +0.0016 -0.0014 / -0.0027 +0.0014 +0.0043
3.0″ RC4 (Running) +0.0000 / +0.0012 -0.0008 / -0.0016 +0.0008 +0.0028
0.5″ LT1 (Locational trans.) +0.0000 / +0.0004 +0.0002 / -0.0002 -0.0002 +0.0006
0.5″ LT3 (Locational trans.) +0.0000 / +0.0006 +0.0004 / -0.0002 -0.0004 +0.0008
1.0″ LT1 (Locational trans.) +0.0000 / +0.0005 +0.0002 / -0.0003 -0.0002 +0.0008
1.0″ LT3 (Locational trans.) +0.0000 / +0.0007 +0.0005 / -0.0002 -0.0005 +0.0009
2.0″ LT1 (Locational trans.) +0.0000 / +0.0006 +0.0003 / -0.0003 -0.0003 +0.0009
3.0″ LT1 (Locational trans.) +0.0000 / +0.0007 +0.0003 / -0.0004 -0.0003 +0.0011
0.5″ LN2 (Locational interf.) +0.0000 / +0.0004 +0.0006 / +0.0002 -0.0006 +0.0002
0.5″ FN2 (Medium drive) +0.0000 / +0.0004 +0.0010 / +0.0006 -0.0010 -0.0002
1.0″ FN2 (Medium drive) +0.0000 / +0.0005 +0.0013 / +0.0008 -0.0013 -0.0003
1.0″ FN4 (Force fit) +0.0000 / +0.0005 +0.0023 / +0.0018 -0.0023 -0.0013
2.0″ FN2 (Medium drive) +0.0000 / +0.0006 +0.0017 / +0.0011 -0.0017 -0.0005
3.0″ FN2 (Medium drive) +0.0000 / +0.0007 +0.0020 / +0.0013 -0.0020 -0.0006

Quick Answer: What Is a Tolerance Fit?

A tolerance fit is the amount of clearance or interference between a hole and a shaft of the same nominal size. The hole and shaft each get their own tolerance band, and the gap or overlap between them sets how the parts go together. Fits are used to size bearings, pins, bushings, dowels and shafts so they slide, locate or stay pressed in place.

This chart uses ANSI B4.1 preferred limits and fits to list: hole tolerance, shaft tolerance, minimum clearance or interference, and maximum clearance or interference. Inputs include nominal size (0.5″ to 3.0″) and fit class (RC, LC, LT, LN and FN).

Typical values at 1.0″: RC4 running ±0.0006–0.0020″ clearance | LC2 locational 0–0.0010″ clearance | LT1 transition −0.0002–0.0008″ | FN2 medium drive 0.0003–0.0013″ interference | FN4 force 0.0013–0.0023″ interference.

Notes on This Chart

  • Tolerances follow ANSI B4.1 standard for preferred limits and fits.
  • Positive clearance means the hole is larger. Negative means interference (shaft is larger).
  • RC = Running/Clearance. LC = Locational Clearance. LT = Locational Transition. LN = Locational Interference. FN = Force/Shrink.
  • Always verify fit calculations with your specific nominal size range in the full ANSI tables.

Need Precision Shafts and Cylindrical Components Machined?

We specialize in precision CNC turning, holding tolerances down to ±0.0001" while maintaining tight control over cylindricity, concentricity, and surface finish. Ideal for custom bearings, shafts, and press-fit pins.

Frequently Asked Questions

What is a clearance fit?

A clearance fit keeps the hole larger than the shaft, allowing the components to slide or rotate with ease. RC and LC fit classes fall into this category and are suitable for parts that require free movement.

With a press fit, the shaft is intentionally larger than the hole, creating interference between the two parts. FN fit classes use this principle, allowing components to stay securely assembled without additional fasteners. They are commonly used for bearings, pins, and permanent assemblies.

A transition fit is designed to produce either a small amount of clearance or a small amount of interference, depending on the actual part dimensions. LT fit classes are used when accurate positioning is needed without requiring a full press fit, such as with alignment pins and locating features.

Choose the fit according to how the parts need to function. RC fits work well for components that must rotate or slide freely, while FN fits are better for permanent assemblies that need to remain fixed. LC and LT fits are useful when accurate positioning and relatively easy assembly are important. Keep in mind that tighter fits generally require more precise machining and can increase production costs.

Scroll to Top