Sheet Metal Thickness Gauge Chart

Convert gauge numbers to inches and millimeters for steel, aluminum, and stainless steel. This chart covers gauges 7 through 30.

Sheet Metal Gauge Thickness Chart

GAUGESTEEL (IN)STEEL (MM)ALUMINUM (IN)ALUMINUM (MM)STAINLESS (IN)STAINLESS (MM)
70.17934.5540.14433.6650.18754.763
80.16444.1760.12853.2640.17194.366
90.14953.7970.11442.9060.15633.969
100.13453.4160.10192.5880.14063.571
110.11963.0380.09072.3040.12503.175
120.10462.6570.08082.0520.10942.779
130.08972.2780.07201.8290.09382.382
140.07471.8970.06411.6280.07811.984
150.06731.7090.05711.4500.07031.786
160.05981.5190.05081.2900.06251.588
170.05381.3670.04531.1510.05631.429
180.04781.2140.04031.0240.05001.270
190.04181.0620.03590.9120.04381.113
200.03590.9120.03200.8130.03750.953
210.03290.8360.02850.7240.03440.874
220.02990.7590.02530.6430.03130.795
230.02690.6830.02260.5740.02810.714
240.02390.6070.02010.5110.02500.635
250.02090.5310.01790.4550.02190.556
260.01790.4550.01590.4040.01880.478
270.01640.4170.01420.3610.01720.437
280.01490.3780.01260.3200.01560.396
290.01350.3430.01130.2870.01410.358
300.01200.3050.01000.2540.01250.318

Quick Answer: What Is Sheet Metal Gauge?

Sheet metal gauge is a number that tells you how thick a metal sheet is. A lower gauge number means thicker metal and a higher number means thinner metal. Gauge is used to spec sheet steel, aluminum and stainless for brackets, enclosures, panels and structural parts in CNC sheet metal work.

This chart uses the Manufacturers’ Standard Gauge (steel), Brown & Sharpe / AWG (aluminum) and the stainless steel sheet standard to convert each gauge into: steel thickness (in), steel thickness (mm), aluminum thickness, and stainless thickness. Inputs are the gauge number (7 through 30) and the metal type.

Common gauges: 10 ga steel = 0.1345″ (3.416 mm) | 16 ga steel = 0.0598″ (1.519 mm) | 20 ga steel = 0.0359″ (0.912 mm) | 7–30 gauge range covered.

Notes on This Chart

  • Steel values follow the Manufacturers’ Standard Gauge (MSG) for sheet steel.
  • Aluminum values follow the Brown & Sharpe (B&S/AWG) gauge standard.
  • Stainless steel values follow the stainless steel sheet gauge standard.
  • Actual thickness may vary slightly by supplier and mill tolerance.
  • Always confirm the exact thickness with your metal supplier before ordering.

Need precision sheet metal parts?

Upload your CAD file for an instant quote. Free DFM review included with every order.

Frequently Asked Questions

What is sheet metal gauge?

Sheet metal gauge is a numbering system used to indicate material thickness. The gauge value works opposite to thickness: a lower gauge number means a thicker sheet, while a higher gauge number means a thinner sheet. For instance, 10 gauge steel is approximately 0.135 inches thick, while 22 gauge steel is around 0.030 inches thick.

Gauge measurements vary depending on the material type because different metals follow different gauge standards. Steel typically uses the Manufacturers’ Standard Gauge, aluminum follows the Brown & Sharpe system, and stainless steel uses its own thickness specifications. Therefore, the same gauge number may represent different thickness values across materials.

The suitable gauge depends on the part’s strength, weight, and application requirements. CNC sheet metal parts commonly use gauges between 10 and 20. Thin sheets such as 22–30 gauge are often used for covers, brackets, and lightweight components, while thicker sheets from 7–12 gauge are better suited for structural and load-bearing applications.

To convert gauge numbers, locate the required gauge in a sheet metal gauge chart and check the corresponding thickness value for the selected material. The chart provides both inch and millimeter measurements. Since thickness standards can vary slightly, always confirm the final specification with your material supplier before fabrication.

Scroll to Top