Thread Chart

Look up major, minor, and pitch diameters for common UNC threads. This chart covers Class 2A (external) and Class 2B (internal) threads from #2 through 3/4 inch.

Thread Size Chart for UNC, UNF and Metric Threads

THREAD SIZE CLASS MAJOR DIA MAX (IN) MAJOR DIA MIN (IN) PITCH DIA MAX (IN) PITCH DIA MIN (IN) MINOR DIA (IN)
#2-56 UNC 2A 0.0860 0.0744 0.0744 0.0692 0.0628
#2-56 UNC 2B 0.0860 — 0.0759 0.0700 0.0667
#4-40 UNC 2A 0.1120 0.0985 0.0958 0.0894 0.0795
#4-40 UNC 2B 0.1120 — 0.0982 0.0911 0.0849
#6-32 UNC 2A 0.1380 0.1218 0.1177 0.1101 0.0974
#6-32 UNC 2B 0.1380 — 0.1202 0.1120 0.1042
#8-32 UNC 2A 0.1640 0.1478 0.1437 0.1353 0.1234
#8-32 UNC 2B 0.1640 — 0.1460 0.1371 0.1302
#10-24 UNC 2A 0.1900 0.1719 0.1629 0.1534 0.1359
#10-24 UNC 2B 0.1900 — 0.1654 0.1555 0.1449
1/4″-20 UNC 2A 0.2500 0.2300 0.2175 0.2067 0.1850
1/4″-20 UNC 2B 0.2500 — 0.2211 0.2094 0.1959
5/16″-18 UNC 2A 0.3125 0.2912 0.2764 0.2643 0.2403
5/16″-18 UNC 2B 0.3125 — 0.2800 0.2674 0.2524
3/8″-16 UNC 2A 0.3750 0.3525 0.3344 0.3209 0.2938
3/8″-16 UNC 2B 0.3750 — 0.3382 0.3242 0.3073
7/16″-14 UNC 2A 0.4375 0.4131 0.3911 0.3762 0.3447
7/16″-14 UNC 2B 0.4375 — 0.3955 0.3800 0.3602
1/2″-13 UNC 2A 0.5000 0.4745 0.4500 0.4337 0.4001
1/2″-13 UNC 2B 0.5000 — 0.4548 0.4378 0.4167
9/16″-12 UNC 2A 0.5625 0.5354 0.5084 0.4907 0.4542
9/16″-12 UNC 2B 0.5625 — 0.5135 0.4951 0.4723
5/8″-11 UNC 2A 0.6250 0.5963 0.5660 0.5468 0.5069
5/8″-11 UNC 2B 0.6250 — 0.5715 0.5516 0.5266
3/4″-10 UNC 2A 0.7500 0.7195 0.6850 0.6640 0.6201
3/4″-10 UNC 2B 0.7500 — 0.6912 0.6693 0.6417

Quick Answer: What Is a Thread Size Chart?

A thread size chart lists the major, minor and pitch diameters for each standard screw thread. It tells you the exact dimensions a thread must hold to fit its mating part. Machinists, designers and inspectors use it to pick a thread, set a tap drill and check parts against a gage.

This chart uses ASME B1.1 Unified Inch Screw Threads to give: major diameter (max and min), pitch diameter (max and min), and minor diameter. It covers UNC sizes from #2 through 3/4″, in Class 2A (external) and Class 2B (internal).

Common sizes: 1/4″–20 UNC major 0.2500″ | 3/8″–16 UNC major 0.3750″ | 1/2″–13 UNC major 0.5000″ | Class 2A is the bolt, Class 2B is the nut.

Notes on This Chart

  • All values are per ASME B1.1threading standard for Unified Inch Screw Threads.
  • Class 2A/2B is the most common fit for general-purpose fasteners.
  • A dash (—) means that value does not apply for the given class.
  • Internal thread major diameter minimums are not controlled by the nut.
  • Always check your thread gage before production to confirm fit.

Need custom threads machined?

Upload your CAD file and we'll machine any thread size — UNC, UNF, metric, and custom. Free DFM review included with every quote.

Frequently Asked Questions

What is the difference between Class 2A and Class 2B threads?

Class 2A refers to external threads, such as those found on bolts and screws, while Class 2B applies to internal threads in nuts and tapped holes. Class 2A threads include a small allowance to provide clearance and ensure smooth assembly. Together, Class 2A and 2B are the most widely used thread classes for general-purpose applications.

The major diameter is the largest diameter measured across the thread crests. The minor diameter is the smallest diameter measured at the thread root. The pitch diameter is the theoretical diameter between them where the width of the thread and the space between threads are equal. It is the key measurement used to determine thread fit and engagement.

UNC (Unified National Coarse) threads have a larger pitch spacing and fewer threads per inch, making them easier to assemble and more suitable for general applications. UNF (Unified National Fine) threads have more threads per inch, providing better adjustment, higher holding strength in thin materials, and improved resistance to loosening. UNC is commonly used for standard fastening, while UNF is selected for precision applications.

The correct tap drill size depends on the thread size, pitch, and desired thread engagement. In most applications, a tap drill that provides around 75% thread engagement offers a good balance between thread strength and tapping performance. Refer to a tap drill chart to find the recommended drill size for each thread specification.

Scroll to Top